Articles Temple
It is ideal to know that one of the best possible ways of securing your premises and at the same time conserve energy is to use motion sensor light switch. Depending on the one you choose for your home , you will always find light switch that intermittently work for between 15 minutes to 24 hours. The motion sensitivity of this devise can work at 150 to 180 degrees, and investing in such a devise will help you save cost on energy and ensuring the security of your home.
There are some accessories you will definitely need when you want to install your sensor switch. Your motion sensor lights is a must and then you will need a Phillip head screw driver, A circuit tester, a flat screw driver, electrician tapes, wire connectors, and wire stripers among several others. First of all you need to take some precautions before installing your light switch , as a matter of fact , you need to switch off power at the circuit box, you may have to turn off the breakers randomly if there are no labels on them until you discover the right ones to turn off. Once you have turned on the right breaker , then you must remove the wall plate from the switch you are replacing, and test the switch to be sure that there is no power-use a circuit tester for this purpose.
You need to locate the old switch and clip the wires with the wire cutter and after that you need to remove the plastic insulation at the end of the black and white wires with the aid of a wire stripper. To the black wire coming from the outlet, you should connect the black wire on the motion sensor light switch, use a wire connector to connect the two black wires after twisting them together. The same procedure should be used for connecting the red wire on the censor to the white wire coming from the outlet. Since the green and yellow wires are not needed , you can cap them using the wire connector.
After the connection of the wires , you should neatly and carefully place them back in the switch box alongside the wireless light switches. Attach the censor to the outlet by using the switch that comes with the switch and your censor light switch is ready for use.
Depending on the time frame you have for your motion switch , you can test your switch in a number of ways. You can test it either in the morning , evening or night depending on when you need it most. If in the morning or afternoon, you can arrange for a person to act as a passerby and when the sensor light switch goes on and off, then you should know that it is perfectly working otherwise you may have to check for the connections or probably the light sensor is not ideally working.
Tags: Home, motion sensor, Security, sensor
Posted in Shopping · May 15th, 2010 · Comments (0)
Though businesses are constantly told about the importance of workplace security, far too few of them actually take the steps necessary to make theirs as safe and secure as it should be. This not only puts employees at risk, but also leads to high insurance premiums. Some insurance companies will even refuse to pay out if they feel that a business has been negligent in relation to workplace security.
Having strong locks on your doors and windows is the first step to making your workplace secure, but doing that alone is not good enough. There are lots of other workplace security precautions that you should be considering, such as these…
- Set-up a CCTV camera to monitor people coming in all building entrances.
- Protect ground floor doors and windows with pull down metal shutters.
- Employ security personnel to guard the main entrance.
- Install a metal detector to minimize the risk of weapons being bought on to the premises.
- Brief employees on steps to take if a threatening or violent incident arises.
- Utilize an under-the-counter alarm system so that employees can discreetly alert security staff if they need assistance.
- Use service counters with windows between employees and customers if located in a high risk area.
- Ensure that from their desk supervisor’s have a clear view of where their employees are working.
- Position the reception desk immediately inside the public entrance.
- Decide on code words to alert co-workers and supervisors that immediate help is needed.
- Issue all employees with photo identification cards.
- Have visitors carry temporary passes with them for the duration of their stay on the premises.
- Rearrange furniture and partitions so that front-line employees (those who are in daily contact with the public) are surrounded by barriers, such as desks and countertops.
If you are unsure which of those that you should implement, then you should consider bringing in a security professional to make a thorough assessment of your workplace and to make workplace security suggestions that are directly relevant to your business. Though this may seem like a lot of effort, it will be worth it in the long run. No business that spends extra time, effort and money on making their workplace safe and secure regrets it. Your premises, equipment and employees are well worth protecting.
Tags: Business, Security, small business, workplace, workplace security
Posted in Security · May 11th, 2010 · Comments (0)